top of page

Fifine BM88 vs BM88 Pro: Which Boom Arm Should You Buy?

3 hours ago
4 min read

The Fifine BM88 is the low-profile boom arm I have recommended for over a year, and the one that lives on my own desk. Now Fifine has a Pro version: longer reach, a higher load rating, a second mounting option, and an RGB light strip down the arm. I put both on my desk, hung my heaviest mic off each one, and tested them side by side. Here is the honest breakdown.



Disclosure: Fifine sent me the BM88 Pro to test. The BM88 is mine, bought with my own money. The links on this page are affiliate links.





The short version


Both arms share the same DNA: all-metal, low-profile so the arm rides below your screens, 360-degree rotation, the mic cable hidden inside the arm, and 1/4", 3/8" and 5/8" adapters in the box. The Pro does not change the BM88 experience. It extends it in four places: reach, load rating, mounting, and lighting.


Reach and build


The BM88 tops out at about 28 inches of reach (27.8"). The Pro stretches to almost 31 inches (30.9"). On a small desk you will never notice the difference. On a wide desk or a dual-monitor setup, those three inches are the difference between the mic floating right in front of you and the mic sitting off to the side. The Pro's arm sections are also a bit thicker, and the build quality on both feels like it costs more than it does.



The load test


This is the test that actually matters. The BM88 is rated for 3.3 lb (1.5 kg); the Pro is rated for 4.4 lb (2 kg). My Shure SM7B with its mount is a heavy mic, and a boom arm that slowly sinks mid-recording is useless. If your mic is light, the BM88's rating is plenty. If you run a heavy broadcast mic, the Pro's extra headroom is a real, measurable upgrade, not a spec-sheet number.


The clamp


The Pro's clamp is smaller on the desk but reinforced, with a rubber pad so it does not chew up your desktop. It also adds a second option the BM88 does not have: a grommet mount, if your desk has a cable hole or you are willing to drill one, for a completely flush install with nothing hanging off the edge. The BM88 is clamp-only, which is fine for most desks; it grips desks up to about 2.4 inches thick.


Everyday use


Day to day, they are the same experience. Both ride low, under your monitors, so your face and your screens stay clear. Both rotate 360 degrees. Both hide the mic cable inside the arm. Both take basically any mic, with all three thread adapters in the box either way. If you love your BM88's workflow, the Pro does not change it.



The RGB


The Pro has RGB light strips down the arm: nine modes, controlled by a touch button on the arm itself or through Fifine's Genie software if you want it matched to the rest of your setup. Does it make your audio better? Obviously not. Does it make your setup look better on camera? Honestly, yes. If you stream with your desk in frame, this is the only boom arm I have tested that adds to the shot instead of just sitting in it. If your arm never appears on camera, the RGB is worth zero dollars to you.



Prices


At the time of writing (Black Friday week, November 2026), the BM88 is $37.90 (typical price $56.99) and the BM88 Pro is $57.79 (typical price $67.99) on Amazon.


Prices move around a lot on both, so check the current price before you decide:




The verdict


Already own a BM88? Keep it. The Pro is a nicer arm, but it is an upgrade in inches and pounds, not a revelation, unless your mic is too heavy for the BM88 or your desk is too wide.

Buying your first arm, with a light mic and a normal desk? The BM88 is still the best value low-profile arm I have used.

Buying once and done? Heavy mic, wide desk, or your setup is on camera for streams: get the Pro. The stronger rating, the longer reach, the grommet option and yes, the RGB, add up to the arm you will not replace.


The BM88 is the value pick. The Pro is the no-compromises pick. Neither one is the wrong answer. It just depends which desk it is going on.


FAQ


What is the difference between the Fifine BM88 and the BM88 Pro?The Pro reaches about 3 inches further (30.9" vs 27.8"), holds heavier mics (4.4 lb vs 3.3 lb), adds a grommet mount alongside the desk clamp, and has RGB lighting with nine modes. Everything else, the low-profile shape, rotation, cable management and thread adapters, is the same.

Can the Fifine BM88 hold a Shure SM7B?Yes. The SM7B with its mount is within the BM88's 3.3 lb rating, and it is the mic I run on mine every day. If you add a heavy shock mount or accessories, the Pro's 4.4 lb rating gives you more headroom.

Is the BM88 Pro's RGB worth it?Only if your setup is on camera. For streamers it genuinely improves how the desk looks in frame. For audio-only work, it adds nothing, and the BM88 is the better buy.


More boom arm tests


BOOM ARM REVIEW, which microphone stand is best for your desk? https://www.youtube.com/watch?v=jIcGkeIMpAgFifine BM88 vs Cahaya boom arm: https://www.youtube.com/watch?v=OVEbVclNVfEFifine BM88 vs Prizmora AS17: https://www.youtube.com/watch?v=-0ypdoyz9o8



Need a second pair of ears on your mix? I mix and master records for independent artists and labels: https://www.nico-essig.com/services-2

 
 
 

Recent Posts

See All

Comments


bottom of page